organ pictures header

Peterborough and District Organists' Association

Picture Page

To change picture size, use Control with +/-

pedal 30 (F) has block spacer and veneer
photo 2
sliders notched, cranked top bar lipped to retain them
photo 3
typical sharp with slide veneer
photo 1

reed switch harness
photo 5
sliders complete, top bar lipped, inverts over sliders
photo 6
sharps nicely set in place
photo 4

wiring cased in  
photo 8
trial reed switch assembly
photo 9
how top F is extended to the right  
photo 7
1 Sharp with long grain veneer on pressure side to adjust fit
2 Pedal 30 (F) has block spacer one side, veneer on the other
3 Sliders notched and top bar lipped to retain them securely
4 Sharps set in place
5 Reed switch harness, unused 31 and 32 just visible at far end
6 Close up of sliders and lipped top bar, inverts to retain them
7 How top F pedal is extended over right side beam
8 Wiring all nicely tucked out of harm's way, good airflow
9 Copper wire pulled to gently clip embedded reed switches























Back to Home Page


about Aprompt accessibility rating